top of page

S8 EV

The ideal plastering machine for the building contractor

S8 EV LARGE

  • Its low power consumption

  • Its output regulation from 0 until the maximum value

  • The biggest pumpable grain size of its category (10 mm)

  • The remarkable wear resistanc​e

​

Here are some of the features that contributed to the success of this small big plastering machine. Produced in Italy and commercialized all over the world, it is available in many versions: single-phase, three-phase, with or without mixer.

 

Its minimal dimensions and light weight allow an easy transport and on-site positioning.

Applications

  • Transportation of self-leveling screeds

​

  • Spraying traditional plaster

​

  • Spraying of fiber-reinforced mortar

​

  • The variable flow rate allows the filling of joints and connections

​

  • Pressure controlled grout injections

​

  • It’s also possible to spray concrete on steel wire meshes for restoration works. Thanks to a practical kit, it is possible to carry out cement slurries injections at a controlled pressure. Using the appropriate spray gun, it’s possible to fill joints or connections.

  • Easy to dismount
    The single-phase B30 is easy to dismount into single parts and can be reassembled on the construction site by a single operator without any tool or effort. This solution makes cleaning and maintenance much easier.
  • Electric control box
    The electric control box is ergonomic and well protected. Using a speed selector, the user can change the pumping speed so that it can work with different outputs.
  • Tools drawer
    All small items can be stored in the drawer located under the machine.
  • Technical Data
    * With D 5-2.5 stator and rotor. Depends on the material, consistency and the diameter of the hoses. The performance is guaranteed with the Bunker stators and rotors.
  • Easy to dismount
    The three-phase B30 is easy to dismount into single parts and can be reassembled on the construction site by a single operator without any tool or effort. This solution makes cleaning and maintenance much easier.
  • Electric control box
    You can control easily all the pump’s functions. A light diode indicates if the machine is correctly connected to the power grid.
  • Tools drawer
    All small items can be stored in the drawer located under the machine.
  • Compressor
    Its 250 l/min compressor is easy to dismount and ensures an uniform application of the material.
  • Technical Data
    * Depending on material, its consistency and hoses diameter. It’s impossible to reach both distances simultaneously. ** With D6-3 rotor and stator
bottom of page