top of page

Single-phase B30

Single-phase plastering machine for ready-mixed dry plasters

B30 single phase

The single-phase B 30, a winning product!

 

The single-phase B30 is a compact plastering machine, easy to use, it’s ideal to mix, pump and spray dry ready-mixed plasters continuously on internal and external walls. It can be used manually
with bags or in automatic mode using silos. Designed to work at 3 speeds, it can be used for a wide variety of materials: lime and cement based plasters, gypsum, anhydrite, insulating plasters, masonry mortar joint filling mortars, cement, and anhydrite based self-levelling screeds.

​

The more air the better the performance

​

The single-phase B30 is the only plastering machine on the market with a Boxer membrane compressor that supplies up to 280 liters of air per minute. The compressor, being powered directly by the screw pump motor, allowed Bunker’s technicians to eliminate an electric motor.
Performances are similar to a three-phase machine.

Applications

  • Traditional or pre-mixed application of plaster and filling joints

  • Injections of cement grouting

  • Pumping mortar and isolating materials

​

  • Easy to dismount
    The single-phase B30 is easy to dismount into single parts and can be reassembled on the construction site by a single operator without any tool or effort. This solution makes cleaning and maintenance much easier.
  • Electric control box
    The electric control box is ergonomic and well protected. Using a speed selector, the user can change the pumping speed so that it can work with different outputs.
  • Tools drawer
    All small items can be stored in the drawer located under the machine.
  • Technical Data
    * With D 5-2.5 stator and rotor. Depends on the material, consistency and the diameter of the hoses. The performance is guaranteed with the Bunker stators and rotors.
  • Easy to dismount
    The three-phase B30 is easy to dismount into single parts and can be reassembled on the construction site by a single operator without any tool or effort. This solution makes cleaning and maintenance much easier.
  • Electric control box
    You can control easily all the pump’s functions. A light diode indicates if the machine is correctly connected to the power grid.
  • Tools drawer
    All small items can be stored in the drawer located under the machine.
  • Compressor
    Its 250 l/min compressor is easy to dismount and ensures an uniform application of the material.
  • Technical Data
    * Depending on material, its consistency and hoses diameter. It’s impossible to reach both distances simultaneously. ** With D6-3 rotor and stator
bottom of page